Application Of Empty Flash Column

Knowledge of Empty Flash Column

irregular c18 flash column chromatography

Empty flash column is one type of flash column, which is used as a solid load cartridge for flash chromatography. It features in a variety of sizes and meets a variety of needs for specific purifications. The length of empty flash column is 115.1, 137.8, 188.2, 188.7, 173.3, 263.5, 146.6, 277.7, 218.5, 271.6. the surface pH is from 6.3 to 7.2, the weight is 4g, 12g, 25g, 40g, 60g, 80g, 100g, 120g, 220g, 330g, and the water content is 3.0-5.0%. Additionally, the column is of excellent pressure and corrosion resistance.

Installation and Operation Manual

The empty flash column provided by Hawach Scientific is simple to install, customers can assemble on their own, provided that the need for our engineers to guide the installation, please contact us immediately. The installation and construction procedure is as below: when empty flash column arrives, check if all accessory components are complete and in good condition, then assemble according to installation documents. All accessory components, such as screw cap, frits, tips, and O-ring, and end tips, should be mounted and connected properly.

If it will not be put into service, please repack it and put it in a proper place to protect it from contamination and damage.